PCBA Cleaning Machine Manufacturer | Inline & Batch Flux Cleaning Equipment.
PCBA Cleaning Machine Manufacturer | Inline & Batch Flux Cleaning Equipment.
ACTSPRAY RESOURCES

How to Remove Flux Residues Under FCBGA Components: Cleaning Methods and Equipment

BGA component on PCBA with potential flux residue contamination beneath the package

FlipChip Ball Grid Array (FCBGA) components are widely used in modern electronic assemblies because they provide high connection density in a compact package.

However, their package structure creates a cleaning challenge. During soldering, flux residues may remain around solder balls and beneath the component body. These areas are difficult to access with conventional surface cleaning methods.

For manufacturers producing high-reliability PCB assemblies, selecting the correct PCBA cleaning process is essential.

1. Why Is FCBGA Flux Residue Difficult to Remove?

Unlike components with exposed leads, FCBGA packages have solder connections underneath the package.

After reflow soldering, flux residues may remain in narrow spaces between the package and PCB.

Several factors influence cleaning performance:

  • Package size and geometry
  • Gap between the component and PCB
  • Flux chemistry
  • Soldering temperature profile
  • Residue aging and contamination level
  • Cleaning liquid properties
  • Spray coverage and rinsing conditions

A cleaning process suitable for one FCBGA design may not produce the same result on another.

2. Why Conventional Cleaning May Be Insufficient

Manual wiping and simple surface washing mainly address accessible contamination.

They cannot reliably demonstrate that residues beneath a FCBGA package have been removed.

For assemblies with dense component layouts, cleaning liquid must reach the target area, dissolve or loosen the residues and carry the contamination away during rinsing.

This requires a properly designed cleaning process.

3. Spray Cleaning for FCBGA Assemblies

Spray cleaning combines chemical action and mechanical force.

The cleaning solution helps dissolve or loosen flux residues, while controlled spray pressure supports liquid exchange around component structures.

Vertical spray cleaning is one option for batch PCBA applications.

In the ACTSPRAY AC620, the spray manifolds remain fixed while the PCBA fixture moves back and forth. This arrangement provides repeated exposure to the spray flow.

The machine supports adjustable cleaning temperature, spray pressure and cleaning duration.

4. The Complete FCBGA Cleaning Process

A typical aqueous PCBA cleaning process consists of three main stages.

Chemical Washing

A suitable cleaning agent is selected according to the flux chemistry and component compatibility.

Temperature, cleaning time and spray pressure must be optimized through actual board testing.

DI Water Rinsing

After chemical washing, DI water rinsing removes dissolved residues and remaining cleaning chemistry.

The number of rinse cycles should be determined by contamination load and required cleanliness.

Hot Air Drying

Hot air removes residual moisture from the cleaned assembly.

Drying time and temperature must be suitable for the PCB materials and sensitive components.

5. How to Verify FCBGA Cleaning Results

Visual inspection alone is not sufficient to evaluate contamination beneath a FCBGA package.

Depending on the application, verification may include:

  • Microscopic inspection
  • Ionic contamination testing
  • Cross-section or destructive analysis where appropriate

The verification method should match the customer’s cleanliness specification.

6. Choosing a FCBGA Cleaning Machine

When evaluating equipment, consider:

  • Spray coverage beneath components
  • Adjustable spray pressure
  • Cleaning solution temperature control
  • Independent washing and rinsing systems
  • DI water quality monitoring
  • Repeatable process settings
  • Fixture compatibility

The ACTSPRAY AC620 is a dual-lane vertical batch PCBA cleaning machine designed for assemblies containing FCBGA, QFN, SiP and other fine-pitch components.

Its two-lane structure allows two rows of assemblies to be processed simultaneously.

Conclusion

FCBGA flux residue removal requires more than simply spraying the board surface. Cleaning chemistry, spray coverage, rinsing quality and process validation all influence the final result.

For demanding FCBGA assemblies, actual sample testing is essential before establishing production parameters.

Learn more about the ACTSPRAY AC620